Finalize The Stow Position Of The Platform - Dhollandia DH-SM.20 Instrucciones De Montaje

EN
M
§6.4 - Finalize the stow position of the platform
Technical details on end stops, platform buff-
ers... May differ between the various types of
sliding tubes . The images under this paragraph
are merely examples. Refer to the annexes for
detailed information per type.
A.3 Alu sliding tubes, side-mounted
A.4 Alu sliding tubes, under-mounted
A.5 Steel sliding tubes, under-mounted
2 end stops at the front of the sliding tubes determine the
position of the HTL and its platform in stow position [See 1
in Fig. 6.12].
Adjust the position of these front end stops to
suit the desired stow position of the platform,
and fasten the locking bolts to the required
torque settings [See annex].
Rubber platform buffers must be mounted
1. To provide a soft means to store the platform under
the vehicle chassis.
2. To make the stow position of the platform comply with
the legal bumper requirements [See Fig. 6.13].
This can be a fabricated set of platform rubbers, foreseen
by the body builder, or any of the standard options S255,
S256 ... S259. See Annexes A.3 to A.5.
DHOLLANDIA
6.12
EJ.
1
1 tornillo /lado
M16 - 8.8
195 N.m
6.13
61