Tabla de contenido
Publicidad
EN
M
6) MOUNTING THE PLATFORM & FINALIZING THE ME-
CHANICAL WORK
§6.1 - Mounting the platform to the lift arms
E
Mount the electric controls at this stage [see chapter 7], or
at least connect the battery and earth cables of the HTL to
an external battery. This will help you to manipulate the
hydraulic cylinders, and to proceed in the mounting of the
platform.
M
Grease the 4 articulations of the lift arm, and
the 2 articulations of the tilt cylinders prior to
mounting the platform and pins [See Fig. 6.1].
Lift up the platform (by forklift, hoist, overhead gantry
crane,...) and bring it in position (horizontal or vertical)
above the lift arms. Align the platform hands with the ar-
ticulation holes of the lift arms, mount the pins, and fasten
their locking bolts [See Fig. 6.2].
6.2.a
Standard platform hands
6.2.b
Option S245 : platform hands moved 100mm
deeper under the platform
1
Pins for the lift arms
2
Pins for the tilt cylinders
DHOLLANDIA
6.1
6.2
6.2.a
2
6.2.b
2
51
1L + 1R
1L + 1R
2
1
1
2
1
Publicidad
Tabla de contenido
