Electrical Connection - DITEC Rex Serie Manual De Instalacion Y Manutencion

Puertas correderas
Ocultar thumbs Ver también para Rex Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
4.

ELECTRICAL CONNECTION

GB
Electrical wiring and starting are shown in the installation manual
of Control Panel EL16 or 192C.
5.
MAINTENANCE PROGRAM (each 6 month)
Power off 230 V~ and batteries:
-
Clean and lubricate the moving components (especially
the inside edges of the guide along which the carriages
run).
-
Check the tension of the belt.
-
Clean sensors and photocells.
-
Check for the stability of the automatism and check that
all the screws are tightened all the way.
-
Check that the wings are correctly aligned, that stops are
properly positioned and that the lock has been correctly
fitted.
Power on 230 V~ and batteries:
-
Check that the lock/release system is working properly.
-
Check for the stability of the door and that the movement
is steady, without friction.
-
Check the operation of all command functions.
-
Check the functioning of the photocells.
-
Check that the forces generated by the door comply with
legal requirements.
-
Check the batteries functioning.
ATTENTION: For spare parts, see the spares price list
REX - IP1838
All right reserved
All data and specifications have been drawn up and checked
with the greatest care. The manufacturer cannot however take
any responsibility for eventual errors, ommisions or incomple-
te data due to technical or illustrative purposes.
14

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rex1Rex2

Tabla de contenido