Environmental Conditions; Service Life - Ottobock 4R10 Quickchange Instrucciones De Uso

INFORMATION
In a prosthesis, all prosthetic components have to meet the patient's
requirements regarding the amputation level, body weight, activity level,
environmental conditions and field of application.
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

3.4 Environmental conditions

CAUTION
Use under unallowable environmental conditions
Fall due to damaged product
► Do not expose the product to unallowable environmental conditions
(see the table "Unallowable environmental conditions" in this section).
► If the product was exposed to unallowable environmental conditions,
take suitable steps (e.g. cleaning, repair, replacement, inspection by
the manufacturer or a specialist workshop etc.).
Allowable environmental conditions
Temperature range: -10 °C – +60 °C
Use - Relative humidity: 0 % – 90 % (Non-condensing)
Storage/Transportation - Relative humidity: 20 % – 90 %
Tyre pressure: 250 – 1100 mbar
Fresh water, Rain, Salt water, Chlorine water, Urine, Dust, Sand – Cleaning required
after contact
Salt-laden air, Particles of foam cosmetics
Commercially available, solvent-free cleaning agents
Unallowable environmental conditions
Storage/Transportation: Mechanical vibrations, Impacts
Cleaning agents containing solvents

3.5 Service life

CAUTION
Exceeding the service life
Fall due to change in or loss of functionality and damage to the product
► Ensure that the service life defined in this section is not exceeded.
22