Anleitung_DHG_200_SPK7__ 20.04.16 13:43 Seite 20
GB
Possible cause
1. Appliance has overheated and the safety
temperature limiter was triggered as a result
2. No mains voltage
3. Faulty miniature fuse
4. Connection between thermal sensor and
electronic circuit board is interrupted
Remedy
1. Switch the ON/OFF switch to OFF (0) and let the
heater cool down for at least 10 minutes. Then
switch the ON/OFF switch back to ON (I).
2. Check the socket, power cable and extension
lead
3. Check the miniature fuse and if necessary,
replace it.
4. Check all electrical connections
20