Metabo HPT C 3607DRA Manual De Instrucciones página 36

English
15. Connecting the dust extractor (Sold separately)
(Fig. 52)
Do not inhale the harmful dusts generated in cutting
operation.
The dust can endanger the health of yourself and
bystanders.
Use of dust extractor can reduce dust related hazards.
By connecting with dust extractor through adapter,
joint and dust collection adapter, most of dust can be
collected.
Connect the dust extractor with adapter.
(1) Connect in order of hose (id 38 mm × 3 m long) and
adapter (Dust extractor's Standard accessory) joint
(Optional accessory) and dust collection adapter
(Optional accessory) with the duct of power tool.
Connection is done by pressing in the direction of the
arrow. (Fig. 52)
The dust collection adapter (Optional accessory) is
fi xed to the duct by a hose band. (Optional accessory)
Dust extractor
Hose (id 38 mm × 3 m long)
Adapter (Dust extractor's
standard accessory)
Dust collection adapter
(Optional accessory)
Joint (Optional accessory)
Duct
16. Using the AC/DC adapter ET36A (sold separately)
WARNING
Using the tool without securing the power cord
could result in contact between the saw blade
and cord that could result in electric shock.
(1) Attaching the hook assembly (Fig. 53)
Using a Phillips screwdriver, fi rmly fasten the hook to
the stopper holder with the screw.
36
Hose band
(Optional accessory)
Fig. 52
Stopper Holder
Hook
Screw
(2) Securing the cord (Fig. 54, 55)
1 Press down the saw head and secure in place with
lock pin.
2 Slide the saw head until it comes into contact with the
front and secure the head with the slide securing wing
bolt.
1
Press down the saw
head and secure
3 Attach ET36A to the tool and secure the cord with the
hook so that the cord is taut.
Make sure the cord is taut!
4
Secure the cord
with the hook
Fig. 53
2
Slide saw head
towards the front
and secure
Fig. 54
3
Attach ET36A
to the tool
Fig. 55