Specific Inverter Parts - Aros 10000P Manual De Instrucciones

3.2.3 Specific Inverter Parts

The main inverter parts are described below:
1) 3 Pairs of DC-Input Terminals: Each input pair consists of positive and
negative terminals. See Chapter 5 for more information.
2) Cooling Fan: The inverter is equipped with 3 air cooling fans. When the
heat sink temperature reaches 50ºC, the fans come on automatically.
3) RS232 Interface: See chapter 10.
4) AC-Output Cable Gland: The cable gland to secure the AC power
wires (cable section within "Suggested min. wire area" and "Maximum
allowed wire area" in Table 1 in appendix.)
5) Ground (PE) Cable Gland: The cable gland serves to secure Ground
(PE) wire for safety purpose. See Chapter 5 for more information.
6) Slot for communication cards: see paragraph 10.2.
7) Graphic Display and Data Logger: see paragraph 3.2.4
8) USB connector: see chapter 11.
9) Display RS232 connector: See chapter 10.
Page 66
- ENGLISH -
7
1
2
3
9
8
6
5
4