System Information - Aros 10000P Manual De Instrucciones

8.3.5 System Information

By pressing "↓" again on "Error History", the LCD shows information about the
inverter, including the firmware version, as shown below.
SYSTEM INFORMATION
S/N:0001054ML20MGT3
FIRMWARE:00.00-00.00
MEMORY:2.0%
DATE: 01/05/10 SAB
TIME: 18:21:30 GMT+01
AUDIO ALARM: On
LANGUAGE: ITA
S/N: The serial number of the inverter
FIRMWARE: The firmware version of the inverter
MEMORY: The memory status of the Data Logger
DATE: The date setting in the inverter
TIME: The time setting in the inverter
AUDIO ALARM: "On" or "Off", the status of the setting
LANGUAGE: The language setting of the display
To change the Date, Time, Audible Alarm and Language settings:
Press "→" and then press "↑" or "↓" to change the parameter to the desired
setting.
Press " " to confirm.
Use "↑" and "↓" to alter the value
Press " " to confirm
Press "←" to finish.
- ENGLISH -
Page 89