Ehaviour If The Memory Is Full; Isplay On Lcd; Text Display - Aros 10000P Manual De Instrucciones

8.2 Behaviour if the memory is full
Once space in the memory is less than 5%, the data logger will emit an audible
alarm to tell the user to free up space in the memory by downloading the data
onto a PC, as described in chapter 11. If the user ignores the warning and does
not free up space in the memory, when the memory is full, the oldest data will be
overwritten by the new data.
8.3 Display on LCD
Startup
After start-up of the inverter, the LCD shows the name, regulation and firmware
version. The screen lasts for 3 seconds, then changes as described below.

8.3.1 Text display

The display shows four measurements and one status. The bottom-right part of
the display shows the time and date. In case of a "warning" or "error" message,
the bottom line "Status" is automatically replaced by the error message.
The user can change the four monitoring parameters:
Press "→" to highlight the monitoring parameter on the first line.
By using "↑" and "↓", the user can move to the next line.
Press " " to begin setting the monitoring parameter.
Press "↑" or "↓" to select the monitoring parameter of the line.
Press " " to confirm.
Press "←" to return to finish the setting
Page 86
- ENGLISH -