Isplay Messages - Aros 10000P Manual De Instrucciones

8.4 Display Messages
See Table 1 in the appendix for reference.
Inverter
conditions
Normal working status Shown in "Status" row on the display
Power off
Standby
Initialization &
waiting
Feeding grid,
MPPT
Waiting to
reconnect to
grid
FLASH
Measurements on display
Instantaneou
s Input power
Instantaneou
s Output
power
Page 92
Display message
in English
No display
Standby
CHECKING
GRID
CONNECTED
RECONNECT
xxx sec
FLASH
Pdc=xxxx/xxxx/xxx
x W
Pac=xxxxW
- ENGLISH -
Description
PV inverter is totally shutdown, when
input voltage is still below the "System
start-up voltage" or when it falls below the
"Shutdown voltage"
"System start-up voltage"< Input voltage
<= "Initial feed in voltage"
Input voltage above "Initial feed in
voltage" and inverter counting down.
Inverter is feeding power. After 10
seconds of this display, LCD will show
output power.
in
The time left to reconnect to the grid
firmware update
The individual input power
The real time output power in xxxx W