4.3 Combination possibilities
Combination 17AD100=16* with 17B203 E-MAG Active
The 17AD100=16* Nexgear Tango ankle joint can be combined with the
17B203 E-MAG Active.
17B203 without
medial support
17B203 with
17B206 medial
support
INFORMATION
Do not make any further static or dynamic changes to the
17AD100=16* Nexgear Tango after automatic calibration of the 17B203
E-MAG Active.
If patient-specific adjustments to the 17AD100=16* ankle joint are
required, repeat the process steps for automatic calibration of the 17B203
according to the 647G1165 instructions for use.
Further information about the 17B203 E-MAG Active is found in the
647G1165 instructions for use.
5 Safety
5.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
5.2 Safety instructions
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
► Only use the product for the defined area of application.
► If the product has been exposed to extreme strain (e.g. due to falling),
take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Max. body
weight
Up to 85 kg
Up to 100 kg
Nexgear Tango
size
17AD100=16*
17AD100=16*
Conditions of
use
Unilateral
Bilateral
33