Foreword; Product Description; Intended Use; Area Of Application - Ottobock 491S75-ST150 Instrucciones De Uso

Foreword

1 Foreword
INFORMATION
Last update: 2018-09-12
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.
INFORMATION
► New information regarding product safety and product recalls can be obtained from the Customer Care Cen­
ter (CCC) at oa@ottobock.com or from the manufacturer's service department (see inside back cover or back
page for addresses).
► You can request this document as a PDF file from the Customer Care Center (CCC) at oa@ottobock.com or
from the manufacturer's service department (see inside back cover or back page for addresses). It is possible
to increase the display size of the PDF document.
These instructions for use provide you with important information on the installation of attachments (protective
pads, edge protection), which are required for the use of the "Dahl docking system" option on approved Ottobock
power wheelchairs.
They also describe the installation of the locking plate, which is provided by Dahl as part of the "Dahl docking sys­
tem" option, on approved Ottobock power wheelchairs.
Please note the following:
• Ottobock only provides the attachments required for the use of the Dahl docking system. These are part of the
Ottobock installation kit for the "Dahl docking system" option (see Page 15). There, information is also
provided on the parts required from Dahl and where these can be ordered.
• Please read these instructions for use prior to installation. The user must also read the instructions before
using the system. These instructions for use must be issued to the user and stored in an easy to reach location
in the vehicle.

2 Product description

Information on the function of the attachments supplied by Ottobock (protective pads, edge protection)
The attachments supplied by Ottobock must be installed and used prior to the use of the Dahl docking system, oth­
erwise the belts of the occupant restraint system could become damaged and their function could be adversely
affected. The attachments supplied reduce the mechanical forces which act on the belt system of the occupant
restraint system.
Information on the function of the "Dahl docking system" option
The Dahl docking system makes it possible to attach wheelchairs to the floor of a vehicle (e.g. in vehicles for trans­
porting persons with reduced mobility). For this purpose, the locking plate supplied by Dahl must first be installed
under the wheelchair (see the section "Installation"). When the wheelchair is driven to the docking station, it is
then attached to the floor of the vehicle using the locking plate. For more detailed information on the overall func­
tion of the Dahl docking system, please consult the operating instructions provided by Dahl.

3 Intended use

3.1 Area of application

The "Dahl docking system" option in conjunction with the attachments supplied by Ottobock was tested in accord­
ance with the ISO 7176-19 standard. It is currently approved for the following Ottobock products:
• 490E75=0_C

3.2 Qualification

The installation and adjustments described below may only be carried out by qualified personnel.
14 491S75=ST150, 491S75=ST155