CAMPAGNOLO BORA WTO 2-WAY FIT Manual Del Usuario página 23

2.2 - FITTING THE TUBELESS TYRE
In order to properly and safely use Campagnolo rims, a perfect seal must exist
between the rim and tire. While Campagnolo makes no representations about their
performance or quality, and is not responsible for any possible failure of the tire.
TO RECOGNIZE A TUBELESS TYRE, CHECK FOR THE TUBELESS WOR-
DING OR LOGO.
2.2.1 - FITTING THE TUBELESS VALVE
Notes
- The valve is supplied already mounted on the rim.
- Periodically check the seal of the valve and the entire Tubeless system (see sec-
tion 2.6). To optimise the seal, we recommend changing the Tubeless valve once
a year.
- Use only the original Campagnolo valve: since there are various types of val-
ves available, identify the correct code for your wheel in the online Spare Parts
Catalogue at www.campagnolo.com or contact a Campagnolo Pro Shop or Service
Centre.
- Tighten the valve locknut (A - Fig. 5) only by hand.
2.2.2 - FITTING THE TUBELESS TYRE
WARNING!
Carefully follow the instructions provided by the tubeless tyre manufacturer.
• Check that the inside of the tyre and rim are perfectly clean; clean them with a
cloth if necessary.
• Thoroughly wet the tyre bead with a dampened sponge or with a moistener
placed (Fig. 6).
6
5
6
A
A