Safety Instructions - SATA jet 4800 K spray mix Instrucciones De Servicio

■ natural wear and tear.
■ abnormal impact.
■ impermissible assembly and disassembly work.
1.6. Applicable directives, regulations and standards
EC machinery directive 2006/42/EC
EC directive 2014/34/EC
Equipment and protective systems intended for use in potentially explo-
sive atmospheres
EN ISO 12100:2011
Safety of machinery, general requirements.
EN 1127-1:2011
Explosive atmospheres Part 1: Basic concepts and methodology.
EN 1953:2013
Atomising and spraying equipment for coating materials - Safety require-
ments.
EN 13463-1:2009
Non-electrical equipment for use in potentially explosive atmospheres -
Part 1: Basic concepts and requirements.
DIN 31000:2011
General principles for the safe design of products.

2. Safety Instructions

Always read and heed all instructions given below. Failure to comply or
incorrect compliance can result in malfunctions or cause injuries.
2.1. Requirements regarding personnel
The spray gun may only be used by experienced skilled workers and
instructed persons who have thoroughly read and understood these oper-
ating instructions.
2.2. Personal protection gear (PSA)
Vapours may be produced during use, maintenance and servicing of the
spray gun. The noise level during production can exceed 85 dB(A).
■ Always use approved personal protective equipment during the usage,
maintenance and cleaning of the automatic gun. The personal protec-
tive equipment consists of breathing and eye protection equipment,
protective overall, protective gloves and safety boots. Wear suitable
hearing protection.
Operating instructions SATAjet 4800 K spray mix
EN
145