Assembly - SATA jet 4800 K spray mix Instrucciones De Servicio

SATAjet 4800 K spray mix
Recommended spray gun inlet pressure
Max. spray gun inlet pressure
Max. material pressure
Air consumption flat fan
(at 3.0 bar/43.5 psi input pressure)
Air consumption round fan
(at 3.0 bar/43.5 psi input pressure)
Max. temperature of the spray medium
Recommended spraying distance
Compressed air connection
Material connection
Weight with material sieve and material nozzle

8. Assembly

Warning!
Risk of injuries from components coming loose or leaking
material.
The high operating pressure can make components come loose or ma-
terial can leak unexpectedly around the material connection.
→ Rate all components around the material connection to the maximum
operating pressure.
→ Use SATA material hoses.
Warning!
Risk of injuries from components coming loose or leaking
material.
If assembly work is performed while the gun is still connected to the
compressed air circuit and material supply, components can unexpect-
edly work loose and material can leak.
→ Disconnect the spray gun from the compressed air circuit and the
material supply before any cleaning work.
→ Depressurise the system.
Operating instructions SATAjet 4800 K spray mix
2.0 bar - 3.0 bar
10.0 bar
250.0 bar
120 Nl/min
310 Nl/min
60 °C
18 cm - 25 cm
1/4" male thread
M16x1.5
760 g
EN
149