Using A Rear View Camera - JVC KW-V40BT Manual De Instrucciones

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS

Using a rear view camera

• To use a rear view camera, a REVERSE GEAR
SIGNAL lead connection is required. (Page 51 )
Activating the rear view camera
1
Display the <Input> setting screen.
On the <HOME> screen:
2
To deactivate: Select [Off] for <Camera Input>.
28
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
For KW-V40BT Region 1/KW-V20BT Region 1/KW-
V200BT/KW-V10 Region 1/KW-V100: To erase the
caution message, touch the screen.
To display the picture from the rear view camera
manually
On the <HOME> screen:
• When displaying the picture from the rear view
camera manually, you can change the setting
of the picture using [Zoom]/[Aspect]/[Adjust].
(Page 39)
To exit the rear view screen
KW-V40BT KW-V20BT/KW-V200BT/
KW-V10/KW-V100