Settings; Sound Adjustment - JVC KW-V40BT Manual De Instrucciones

SETTINGS

SETTINGS

Sound adjustment

Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV
• You cannot adjust the sound when the AV source
is turned off .
Selecting a preset sound mode
1
Display the <Equalizer> screen.
On the <HOME> screen:
On the source control screen:
38
2
Select a sound mode.
• You can change the page to display more
items by pressing [ J]/[ K].
Storing your own adjustment—Customizing
preset sound mode
1
Select a sound mode. (See the left column.)
2
Adjust the level of each band (1), then
select the subwoofer level (2).
The adjustments are stored and <User> is
activated.
• To finish the procedure, press [
Storing your own adjustment— Adjusting the
sound precisely
1
Select a sound mode (see the left column),
then...
2
Select a band.
3
Adjust the sound.
<Reset>
<Freq>
<Q>
<Bass >
<SW Level>
The adjustments are overwritten if the <User>
setting has been created (see the left column),
and <User> is activated.
• To finish the procedure, press [
• The adjustments are memorized until you adjust
sound again.
].
• To make adjustment for other bands, repeat steps
2 and 3.
* Fixed for "High" band.
1
*
2 Only for "Low" band.
Changes level of Low/Mid/
High to 0.
Selects frequency.
Adjusts the width of the
frequency.*
1
Activates/deactivates bass.*
2
Adjusts subwoofer level.
].