Bluetooth (Only For Kw-V40Bt/Kw-V20Bt/ Kw-V200Bt); Information For Using Bluetooth® Devices; Connecting Bluetooth Devices - JVC KW-V40BT Manual De Instrucciones

Ocultar thumbs Ver también para KW-V40BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BLUETOOTH
BLUETOOTH
(Only for
(Only for
Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using
the phonebook, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
Bluetooth Information: If you wish to receive
more information about Bluetooth, visit the
following JVC web site:
<http://www.jvc.net/cs/car/>
30
KW-V40BT/KW-V20BT/KW-V200BT
KW-V40BT/KW-V20BT
/KW-V200BT
Bluetooth profile
This unit supports the following Bluetooth profiles:
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.3
• PBAP (Phone Book Access Profile) 1.0
• SPP (Serial Port Profile)
Icons for the Bluetooth button
No device is connected.
A Bluetooth audio player is connected.
A Bluetooth mobile phone is connected.
Both a Bluetooth mobile phone and audio
player are connected.

Connecting Bluetooth devices

Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
)
)
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• To use the registered device, you need to connect
the device to the unit. (Page 32)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1
Search "JVC Unit" from your Bluetooth
device.
2
Confirm the request both on the device
and the unit.
123456
OK
• Press [Cancel] to reject the request.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kw-v20btKw-v200btKw-v10Kw-v100

Tabla de contenido