Removing The Unit - JVC KW-V40BT Manual De Instrucciones

Ocultar thumbs Ver también para KW-V40BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
Connecting microphone for Bluetooth
(only for KW-V40BT/KW-V20BT/
KW-V200BT)
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).

Removing the unit

Region4/KW-V20BT Region 4/KW-V10
Region 4)
Removing the trim plate
1
Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
2
Remove the upper two locations.
7
• The frame can be removed from the top side in
the same manner.
(only for KW-40BT
1
2
4
• Be careful to avoid injury from the catch pins on
Removing the unit
Remove the trim plate. (See the left
column.)
Insert the two extraction keys (4), then
pull them as illustrated so tat the unit can
be removed.
4
the extraction key.
ENGLISH
53

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kw-v20btKw-v200btKw-v10Kw-v100

Tabla de contenido