9.6. Actions in relation to treatments
Before treatment
• Check the patient for absolute and relative contraindications
• Test the thermal sensitivity of the treatment area
• The skin of the area in question is cleaned (removal of grease) with soap or 70 % alcohol to permit
optimal transmission of the ultrasound
• If the skin is hairy shaving is best
During treatment
• The treatment head is kept in slow continuous motion, also for the semi-static method
• The patient is regularly asked to report any sensations felt. If necessary the treatment is modified;
the intensity can be reduced or a switch is made from continuous to pulsed ultrasound
• If there are indications of poor transfer of the ultrasound energy the contact medium can be re-
viewed if necessary or it can be moved with the treatment head
After treatment
• The patient's skin and the treatment head are cleaned with a towel or tissue. The treatment head is
also cleaned with 70 % alcohol
• The expected effects are checked (e.g. pain, circulation and mobility)
• The patient is asked to comment subsequently on any reactions that may occur
24