Philips LBB 3530/00 Instrucciones De Uso página 27

DCN Discussion System
9.10 Menu Displays
Eng
Menu a.
Select Display Programming Language
Select user language: <ENGLISH>
FRANCAIS DEUTSCH ITALIANO
ESPANOL NEDERLANDS
Menu b.
Select booth number
Select booth number:
<1> 2 3 4 5 6 7 8 9 10 11
Note: The booth number selected can be
different from the channel number.
Menu c.
Select desk number within a booth
Select desk number:
<1> 2 3 4 5 6
Menu d.
Select number of channels
Select number of channels:
<1> 2 3 4 5 6 7 8 9 10 11
Menu e.
Select language list
Select language list:
<ENGLISH> FRENCH ORIGINAL
Menu f.
Select language Channels 1 - 11
Select language for channel 1:
<ENG - ENGLISH>
Menu g.
Select outgoing channel via A-output
Select outgoing channel via A-
output:
<1> 2 3 4 5 6 7 8 9 10 11
Instructions for use
Menu h.
Select outgoing channel(s) via B-output
Select outgoing channel via B-
output:
<NONE> ALL
Menu j.
Select number of auto-relay booth(s)
Select number of auto-relay
booth(s):
<NONE> 1 2 3
Menu k.
Select auto-relay booth
Select auto-relay booth 1:
<Booth 1>
Note: Only available if auto-relay booths
are selected in menu j.
Menu l.
Select microphone locks between booths
Select microphone locks between
booths:
<NONE> OVERRIDE INTERLOCK
End Programming session
To end the programming session and return
the desk to its normal operational mode -
Press keys 'Pre-select b
B ' keys simultaneously.
End, use keys 'b' and 'B' to
return to operational mode.
14
' and the 'Outgoing