Cobra Connex Guardian Manual De Uso página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
USER GUIDE
Message type
Welcome Message
Codes Transmission
Theft Alert
Vehicle Ignition On Alert
Garage Mode active for
more than xx days
Garage Mode auto
deactivation failed
Transport Mode active for
more than xx days
Transport Mode auto
deactivation failed
Device disarmed for more
than xx days
Reason for Message
This message is sent when your service is activated.
It contains the Override code for the Remote Control
to disarm the device in case of emergency and to
set/unset the Special Modes.
Your personal codes can be resent or regenerated
and resent by the Service Provider or by the Secure
Operating Centre.
This message is sent if your device has sent a theft
alert to the Secure Operating Centre.
This message is sent when the vehicle ignition is
switched on while the system is armed.
This message is sent when the device has been set
to Garage Mode for more than the expected number
of days.
This message is sent if the confi gured time period
for the Garage Mode has passed but the system
has been unable to unset this mode in the device.
This message is sent when the device has been
set to Transport Mode for more than the expected
number of days.
This message is sent if the confi gured time period
for the Transport Mode has passed but the system
has been unable to unset this mode in the device.
This message is received when the device has
been set to Forced Unset Mode for more than the
expected number of days.
None.
Keep these codes safe.
If possible, check the state of the vehicle. If the
Secure Operating Centre does not contact you
immediately, you should contact them.
In case it is not a false alert (you forgot to disarm the
system) contact the Secure Operating Centre.
Contact the Secure Operating Centre. If the Garage
mode is still required, it can be reset.
Contact the Secure Operating Centre.
Contact the Secure Operating Centre. If the
Transport mode is still required, it can be reset.
Contact the Secure Operating Centre.
Contact the Secure Operating Centre. If the Forced
Unset mode is still required, it can be reset.
11
Your Actions

Publicidad

Tabla de contenido
loading

Tabla de contenido