Installations Procedures; Electric Installation - Hofmann monty 3300 Manual De Operador

62
monty 3300 / 3300AIR
iii Installation procedures.

Electric installation

THE INSTALLATION SHALL BE CARRIED OUT ONLY BY
QUALIFIED PERSONNEL AND WITHIN THE SCOPE
OF THE INSTRUCTIONS PROVIDED IN THIS MANUAL.
FOR ELECTRIC MOTOR TYPE ONLY:
Check on the plate of the machine that the electrical
specifications of the power source are the same as the
machine.
The machine uses 0.75 kW and 120 VAC, 50-60 Hz, 9
A when equipped with a 1phase motor.
The electric motor operates in a wide voltage range (plus
or minus 10%) and frequency range (50 or 60 Hz) and
has a class of insulation suitable for hot and moist
climates.
Electrical specifications are clearly marked on a label
at the end of the electric cable.
Before connecting the machine to the power source
check that the power supply has an efficient earthing
system.
Note:
Connect the electric cable of the machine with an
approved plug.
Note:
Operator's Manual
The yellow/green wire in the cable is the
earth wire. Never connect the earth wire
to a live terminal.
The outlet installation must be verified by
a licensed electrician before connecting
the tire changer.
USA - CANADA