Adjusting The Back Height; Back Heigh-Adjustments; Adjusting The Pad Height; Pad Angle Rotation/Fore And Aft - Sunrise Medical Zippie Neptune Manual De Usuario

12.0 Back Heigh-Adjustments

WARNING!
Always ensure that the back is secure and the bolts are
tightened before using the chair.

Adjusting the Back Height

• Loosen the two hand wheels (A) on the plastic back panel
by half a turn, (Fig.12.1).
• Slide the plastic panel up or down to the desired height.
• Tighten the two hand wheels securely to fix the back in
place.
NOTE:
The two hand wheels, (A) may be replaced with screws
requiring a 4mm Allen Key (supplied).
Fig.12.1
A
Neptune Rev.1.0

13.0 Sacral Pad-Adjustments

WARNING!
Always ensure that the back is secure and the bolts are
tightened before using the chair.

Adjusting the Pad Height

• Pull the cushioned pad away from the framework.
• Loosen the allen key bolts (A) by a half turn with a 4mm
allen key (supplied).
• Move the sacral plate up or down within the adjustment slot.
• Once in place tighten bolts (A) to secure, (Fig.13.1).

Pad Angle Rotation/Fore and Aft

• Loosen allen key bolts (B) on either side of the chair and
gently tilt the pad up or down and move forward or back to
set the desired position of the sacral pad.
• Once in place securely re-tighten the allen key bolts,
(Fig.13.2).
Fig.13.1
A
Fig.13.2
B
15