Type Key - Wilo Rexa PRO Instrucciones De Instalación Y Funcionamiento

4.7

Type key

Installation and operating instructions Wilo-Rexa PRO
Product description
Non-immersed [OTe]
- Motor P 13:
- Motor P 17:
Pressure connection
PRO V05...
PRO C05...
PRO V06...
PRO C06...
PRO V08...
PRO C08...
PRO V10...
PRO C10...
Suction connection
PRO V05...
PRO C05...
PRO V06...
PRO C06...
PRO V08...
PRO C08...
PRO V10...
PRO C10...
* Operating mode S3 50 % is permitted if the necessary motor cooling is guaranteed
before the motor is switched on again! To ensure the required cooling, the motor must
be completely immersed for at least 1 min.!
** S1 operation is dependent on the motor power. Observe and comply with the spe-
cification regarding "non-immersed" operating mode on the rating plate!
Statement of date of manufacture
The date of manufacture is stated in accordance with ISO 8601: JJJJWww
▪ JJJJ = year
▪ W = abbreviation for week
▪ ww = calendar week
Example: Wilo-Rexa PRO V06DA-110/EAD1X2-T0015-540-P
Series
PRO
Impeller shape
V V = vortex impeller
C = single-channel impeller
Nominal diameter of pressure connection
06
Hydraulic version:
D D = suction side drilled acc. to DIN
N = suction side drilled according to ANSI
Hydraulics material version: standard
A
Hydraulics definition
110
Motor version: surface-cooled motor
E
"Motor" material version: standard
A
Seal
D D = two mechanical seals
B = cartridge seal
IE-efficiency class (derived from IEC 60034‑30)
1
Ex-rated
X
X = ATEX
S1**, S2-30, S3 25%*
-
DN 50, PN 10
DN 50, PN 10
DN 65/80, PN 10
DN 65/80, PN 10
DN 80/100, PN 10
DN 80, PN 10
DN 100, PN 10
DN 100, PN 10
DN 50, PN 10
DN 65, PN 10
DN 80, PN 10
DN 100, PN 10
en
149