Ki Mobility Little Wave FLIP XP Manual De Instrucciones Y Garantía página 37

V. SET UP & USE OF YOUR WHEELCHAIR
Q. Hand Tilt Mechanism
3. Locking Triggers
a. Pins are provided to secure the trigger in either the locked or unlocked position.
To secure the triggers in the locked position:
a. Determine which style back canes and trigger were provided with the chair by checking
against Fig. 39 and 40.
b. Make sure the chair is locked by pushing on the back handles.
c. Insert the pin attached to the trigger by a lanyard into hole (Fig. 39:A and 40:A).
d. Make sure the trigger no longer releases the tilt locks by gently squeezing the trigger and
pushing on the back canes to tilt the chair.
To secure the triggers in the unlocked position:
a. Determine which style back canes and triggers were provided with the chair by checking
against Fig. 39 and 40.
b. Squeeze the triggers to unlock the tilt mechanism while holding the back canes and con-
trolling the tilt position.
c. Allow the seat frame to tilt until it comes to rest in a stable position.
d. Insert the pin attached to the trigger by a lanyard into hole (Fig. 39:B and 40:B).
B
Fig. 39
WARNING: Never leave someone seated in the chair unattended with the triggers secured in the
unlocked position. This may lead to serious injury to the person seated in the wheelchair.
A
35
Fig. 40
B
A