V. SET UP & USE OF YOUR WHEELCHAIR
D. Height Adjustable T-Arm
1. Installation
a. Slide the outer arm post into the receiver mounted to the wheelchair frame.
b. The armrest will automatically lock into place. Check to make sure the locking lever is as
shown (Fig. 8:B).
2. Height Adjustment
a. Rotate release lever (Fig. 8:A).
b. Slide armrest pad up or down to desired height.
c. Return lever to locked position against arm post.
d. Push arm pad until upper arm post locks firmly into place. Check to make sure the locking
lever is as shown (Fig. 8:A).
3. Removal
a. Squeeze release lever (Fig. 8:B) and remove the armrest.
19
Fig. 8