Multi-Angle Footrest - Ki Mobility Little Wave FLIP XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
N. Multi-Angle Footrest
1. Changing Footrest Angle (Fig. 28)
The Multi-Angle Footrest utilizes a ball joint which allows the footrest to be set in a variety of angles
just by applying pressure to different areas on the top of the footplate.
Fig. 28
Ball Shaft - Up Position
2. Changing Footrest Height
a. Remove footplate assembly from hanger by removing screw (Fig. 29:G), washer (Fig. 29:F),
washer (Fig. 29:E), saddle spacer (Fig. 29:D), washer (Fig. 29:C), washer (Fig. 29:B) and nut
(Fig. 29:A) using a 5mm Allen wrench and a 10mm wrench.
a. Slide the footplate assembly to desired height and reinstall hardware in nearest hole.
A
Ball Joint
B
C
E
Ball Shaft - Down Position
D
29
Fig. 29
F
G
Ball Joint