Contact Information; Product Description - Stryker Altrix 8003-002-001 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
English (EN)
Symbols
General warning
Refer to instruction manual/
booklet
Altrix™ controller
Do not puncture
CAUTION
US Federal Law restricts this device to sale by or on the order
ONLY
of a licensed physician.
Environmental conditions
Ambient temperature
Relative humidity (non-condensing)
Atmospheric pressure
Introduction
This manual assists you with the operation of your Stryker product. Read
this manual before operating this product. Set methods and procedures to
educate and train your staff on the safe operation of this product.
CAUTION
Improper usage of the product can cause injury to the patient or
operator. Operate the product only as described in this manual.
Do not modify the product or any components of the product. Modifying
the product can cause unpredictable operation resulting in injury to
patient or operator. Modifying the product also voids its warranty.
Note: Stryker continually seeks advancements in product design and
quality. This manual contains the most current product information
available at the time of printing. There may be minor discrepancies
between your product and this manual.

Product description

The Altrix Temperature Management Wraps™ is a torso or thigh
wrap that you can use individually or in combination. The Colder style
connectors provide the means to connect to the Altrix Precision
Temperature Management System (referred to as the Altrix controller).
Indications for use and Contraindications
Always consult the Altrix controller operations manual before you apply
the wrap.
Expected life
Each Altrix Temperature Management Wraps has a 14 day single
patient use expected life under normal use conditions.
Material
Polyurethane (ether-based), Polyester Polyurethane Foam, Non-Woven
Spun-Bonded Polyester Fabric (patient side)
2
Caution
Consult instructions for
use
Single patient use
1
MR conditional under the following conditions:
MR
3T static magnetic field
Operation
89.9 °F
(32.2 °C)
59 °F
(15 °C)
75%
30%
1060 hPa
700 hPa
Catalogue number
CE mark
Manufacturer
Use-by date
Storage
140 °F
(60 °C)
-40 °F
(-40 °C)
95%
10%
1060 hPa
500 hPa

Contact information

If you have any questions, contact Stryker Customer Service or Technical
Support at 1-800-327-0770.
To view your product manual online, see https://techweb.stryker.com.
Have the Lot batch code (A) available when you call Customer Service.
Include the Lot batch code in all written communication.
Small torso
Large torso
Small left thigh
Small right thigh
Large left thigh
Large right thigh
Small kits
8003-002-003
8003-003-001
x
8003-003-003
x
Large kits
8003-002-005
8003-003-002
x
8003-003-004
x
8003-009-005 REV D
Quantity
Authorized representative in the
European Community
Batch code
WARNING magnetic field
For US Patents see
www.stryker.com/patents
Transportation
-20°F
(-29°C)
25 %
Not applicable
A
A
26 in. - 47 in.
95-240 lb
(66-119 cm)
(43-109 kg)
35 in. - 60 in.
150-350 lb
(89-152 cm)
(68-159 kg)
16 in. - 28 in.
115-250 lb
(41-71 cm)
(52-113 kg)
19.5 in. - 32 in.
157-313 lb
(50-81 cm)
(71-142 kg)
8003-002-004
x
x
8003-002-006
x
x
140 °F
(60 °C)
95 %
8003-002-001
8003-002-002
8003-002-003
8003-002-004
8003-002-005
8003-002-006
8003-002-001
x
n/a
8003-002-002
x
n/a

Publicidad

Tabla de contenido
loading

Tabla de contenido