Troubleshooting; Troubleshooting Leds - Eaton Pulsar Serie Manual De Instalacion Y Uso

5. Troubleshooting

Troubleshooting LEDs

-
34008486EN/AC Page 34
1
2
3
4
5
I O
6
I O
7
8
I O
9
10
If LED (1) is ON:
the equipments are protected by the UPS
but the operation is downgraded.
If LED (2) is ON:
the equipments are no longer protected
by the UPS.
Press the escape button (3) to stop the
audible alarm.
Note :
In case of "MULTIPLE FAULT", press the
"Enter" button (4) and the scroll button (5)
to get access to further details.
In case of "LCM WARNING", refer to LCM
section (see section 6, page 38).
if LED (6) is ON:
The equipments are no longer supplied.
Follow the displayed instructions.
if one of the following LEDs is ON
Rectifier LED (7)
Inverter LED (8)
Battery LED (9)
Bypass LED (10)
One of the main UPS function has faulted.
Follow the displayed instructions.