Service Window; Displaying The Service Window; White Balance; Registration Adjust - Sony SRX-S110 Manual De Instalación E Usuario

SERVICE Window

The SERVICE window is used for adjustment by your
Sony dealer.

Displaying the SERVICE Window

When you click the SERVICE button in the Control
Function Menu window, the authentication dialog opens.
Enter the password in the Password text box, then click
"OK."
The default setting of the password is "service."
The SERVICE window is displayed.

WHITE BALANCE

Changes the preset values of "CUSTOM1," "CUSTOM2,"
"CUSTOM3" and "CUSTOM4" for "Color Temp" in the
COLOR/FRAME window.
Adjust each of Gain R (red)/G (green)/ B (Blue) and Bias
R (red)/G (green)/ B (Blue) to obtain the desired color
temperature.
Notes
• "WHITE BALANCE" can be adjusted only when the
screen mode is set to single screen mode.
• The adjusted values affect "Color Temp" only for the
currently selected input signals.

REGISTRATION ADJUST

A red and blue picture element can be moved for
registration up to two picture elements vertically and
horizontally.
Click the On radio button to enable you to move a red and
blue picture element. When you click the Off radio button,
you cannot move a picture element.
H: Moves the picture elements horizontally.
When you click the R
move a red picture element right or left up to two
28
SERVICE Window
or button, you can
elements each.
When you click the B
move a blue picture element right or left up to two
elements each.
V: Moves the picture elements vertically.
When you click the R
move a red picture element up or down up to two
elements each.
When you click the B
move a blue picture element up or down up to two
elements each.
Notes
The following symptoms appear on the displayed picture
after you have moved the picture elements:
– In single-screen mode with four signal sources input,
two picture elements each on the upper, lower, left and
right sides may be invisible as the visible aspect ratio is
4092 × 2156 dots.
– In dual-screen mode with two signal sources input, two
picture elements each on the left and right sides are not
visible, and a black vertical line may appear in the center
of the screen.
– In quad-screen mode with four signal sources input, two
picture elements each on the upper, lower, left and right
sides are not visible, and black vertical and horizontal
lines may appear in the center of the screen.

LAMP TIMER RESET

The used hours of Lamp A and Lamp B are displayed.
Clicking the RESET button resets the time to "0H." Reset
the time after replacing the lamp with a new one.

INTERPOLATION

When projecting a 2K-resolution image, set to "On." You
can obtain high-resolution picture quality with a smooth
image.
When set to "Off," the projected image appears rough.

STATUS MESSAGE CONTRAST

Adjusts the contrast of the STATUS MESSAGE window
on the left side of the projector.

COLOR SPACE CONVERTER

The color characteristics of the projector can be corrected
for each color gamut, "709" or "DCDM."
or button, you can
or button, you can
or button, you can