Preparing The Blender; Important - Wolf Gourmet B82 Serie Manual De Uso

PARTS AND FEATURES
Variable Speed Control Knob: When using MANUAL
10.
( ) mode, select any speed for blending and pulsing
by rotating the control knob from 1 to 12. Available in
black, red or brushed.
Base: Contains the motor. DO NOT IMMERSE BASE IN WATER.
11.
Rating Plate Location: Model number and rating information can be found under the
12.
base.
Sleep Mode: After 10 minutes of inactivity, the display
panel will go into Sleep Mode and show a blank screen.
To exit Sleep Mode, turn the selector bezel to OFF ( ) or
press PULSE or START/STOP button.
Automatic Overload Protection: The Wolf Gourmet
Blender is equipped with motor overload protection. If the
motor stops during operation due to overheating, unplug
and allow it to cool down for about 15 minutes. Plug
blender back in to resume normal operation.

Preparing the Blender

After unpacking the blender, wash
everything except blender base in hot,
soapy water. Dry thoroughly. Wipe blender
base with a damp cloth or sponge. DO
NOT IMMERSE BASE IN WATER. Care
should be taken when handling cutting
blade assembly since it is very sharp. Refer
to care recommendations on page 15.
IMPORTANT: Blender jar and cutting
blade assembly are subject to wear
during normal use. Always inspect jar for
nicks, chips or cracks. Always inspect
cutting blade assembly for broken,
cracked or loose blades. If jar or cutting
blade assembly is damaged, do not use.
Call our customer care centre to obtain
replacement parts.
8
Selecting Blender Settings
Select from four program settings or use
the MANUAL ( ) mode for precise speed
control.
WARNING
Burn Hazard
Metal parts under blending jar get hot after
use. Do not touch.