Bien-Air Dental Chiropro Plus 3rd Gen Instrucciones De Uso página 19

1
FIG. 3
NOTES
1
Real-time speed value is displayed in black when the
LED
micromotor is running. Maximum reachable speed value
stored is displayed in cyan when the
running, in steps P1 and P2.
2 The contra-angle ratio is cyan-colored for direct-drive, green-
colored for reduction gears and red-colored for multiplication gears.
3
Each step settings are restored from the corresponding step
last used settings, excluding quick settings made directly in the
Operation mode.
4
In REVERSE mode, the rotation direction symbol
and there is a sound alert (alternate medium beeps).
5
Actions on footpedal's buttons have no effect when the micro-
motor is running.
6
Changes made in this mode (either by rotating the knob or by
changing parameters through the footpedal buttons) are consid-
ered as temporary settings and are never saved.
7
Changing the torque can only be performed through the Set-
tings mode.
MX-i
MX-i LED
micromotor is not
blinks
17