Irrigation Level; Contra-Angle Ratio; Luminosity Level - Bien-Air Dental Chiropro Plus 3rd Gen Instrucciones De Uso

9.5 Irrigation level

A. From the Settings mode menu, select the
short press on the knob to change irrigation level.
Note 2
FIG. 4
B. Turn the knob CW or CCW to set up the irrigation level (1).
6 levels of adjustment are possible:
irrigation OFF, 30ml/min, 60ml/min, 90ml/min, 120ml/min,
150ml/min.
Note 4
C. Short press on the knob to exit irrigation level setting.

Irrigation level is saved and the Settings mode menu is
displayed again.

9.6 Contra-angle ratio

A. From the Settings mode menu, select the
short press on the knob to change the contra-angle ratio.
B. Turn the knob CW or CCW to change the contra-angle ratio.
Note 5 - 6
C. Short press on the knob to exit the contra-angle ratio setting.

The contra-angle ratio is saved and the Settings mode menu is
displayed again.

9.7 Luminosity level

A. From the Settings mode menu, select the
short press on the knob to change luminosity level.
Note 2
B. Turn the knob CW or CCW to set up the luminosity level.
10 levels of adjustment are possible.
C. Short press on the knob to exit luminosity level setting.

Luminosity level is saved and the Settings mode menu is
displayed again.
1
FIG. 3
symbol and
symbol and
symbol and
FIG. 4
NOTES
1
Directly switching from a setting sub-mode to operation mode
is not possible. The setting must be first acknowledged by means
of a short press.
2
The operation mode, rotation direction, irrigation level and the
luminosity level symbols differ depending on the actual settings.
3
In implantology mode, the Torque value is automatically in-
creased in REVERSE mode when torquemeter is displayed. The
torque value can be increased from 0 to 10 Ncm, see chapter " Re-
verse torque boost value" on page 20 to adjust it.
4
When setting the irrigation level to OFF, all dots (1) are dis-
played in black. Irrigation level is off when the irrigation is com-
pletely turned off by means of the footpedal's blue button,
regardless of the active step. In this case, the OFF symbol is dis-
played in Operation mode. The irrigation is considered as a quick
setting and therefore is turned ON when starting again from step
P1.
5
The contra-angle ratio is cyan-colored for direct-drive, green-
colored for reduction gears and red-colored for multiplication
gears.
6
The contra-angle labelled "125L" corresponds to a multiplica-
tion ratio of 1:2.5.
1
19