Descargar Imprimir esta página

Babyauto TEKIE i-SIZE Manual De Uso página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT
Please read carefully BEFORE installing
the child seat in the vehicle.
1.
The correct fitting of 3-point belt or the ISOFIX anchoring systems is
of vital importance for the safety of your child.
2. Under no circumstances should the safety seat be installed in the front
seat of the car opposite the direction of travel if the car is equipped
with an active airbag.
3. This car seat is designed to offer the optimal safety in all installation
modes described in this manual.
4. This is an "i-Size Universal" child restraint system, it is approved to
regulation No. 129 series of amendments, for general use in vehicles
and it will fit most, but not at all, car seats.
5. A correct fit is likely if the vehicle manufacturer has declared in the
vehicle handbook that the vehicle is capable of accepting an "i-Size
Universal" child restraint system for this age group.
6. Ensure that the part of any abdominal belt or strap should rest as low as
possible over the child's hips, on both sides.
7. Please read the instructions carefully, as incorrect installation could
result in serious injury. If any injuries should occur as a result of
incorrect installation, the manufacturer will accept no liability.
8. The product has been approved according to the strictest European
safety standards (ECE R129) and is suitable for the height range
between 40 and 105 cm.
9. Please never use the safety seat without its cover or without the
harness protectors.
10. Fastening a child dressed in outerwear could reduce the efficiency of
the restraint system.
11. Make sure to protect the child safety seat from direct sunlight as it
could heat up and hurt the child.
12. Child seats or harness accessories that are damaged or have been used
incorrectly must be replaced.
21

Publicidad

loading

Este manual también es adecuado para:

Wd018