Vertical Alignment; Measured Horizontal Misalignment - SKF TMEA 1P/2.5 Instrucciones De Uso

3.8.2

Vertical alignment

The values which now appear on
the display indicate the relative
positions of the Movable machine
when viewed from the side
(fig. 22).
Feet values
The left value indicates the
relative position of the front pair
of feet of the Movable machine.
The right value shows the relative
position of the rear pair of feet.
A positive value means that the
feet are too high and need to be
lowered while a negative value
means the opposite (fig. 23).
a) If possible use the shims
included with the tool to
adjust the height of the
machine.
Note!
will bring back the
vertical misalignment
values.
b) After having carried out the
vertical alignment press the
"next" button to reach the
measured horizontal
misalignment.
3.8.3 Measured horizontal
misalignment
Before reaching the horizontal
misalignment figures you need to
move the measuring units to the
3 o'clock position (fig. 24).
TMEA 1P/2.5 / TMEA 1PEx
Fig. 22. Vertical alignment
Feet values
Fig. 23. Vertical alignment
Fig. 24. The 3 o'clock position
Shaft Alignment Tools 25