Safety Recommendations For Tmea 1P/2.5 - SKF TMEA 1P/2.5 Instrucciones De Uso

SAFETY RECOMMENDATIONS FOR TMEA 1P/2.5

• Always turn off the power of the drive machine before you
start working.
• Do not expose the equipment to rough handling or heavy
impacts.
• Always read and follow the operating instructions.
• The tool uses two laser diodes with an output power below
1 mW. Still, never stare directly into the laser transmitter.
• Calibrate the equipment regularly.
• Never aim the laser beam into someone's eyes.
• Opening the housing of the measuring unit may result in
hazardous light exposure and voids warranty.
• The equipment should not be used in areas where there is a
risk for explosion.
• Do not expose the equipment to high humidity or direct
contact with water.
• All repair work should be taken care of by an SKF repair shop.
TMEA 1P/2.5 / TMEA 1PEx Shaft Alignment Tools 7