Explanation Of Display Items - Tunturi FitRun 70i Manual Del Usuario

English
Incline up
- Increases the incline (0~15 ±1).
- Scroll programs and change values in programming Mode.
Incline Down
- Decreases the incline (0~15 ±1).
- Scroll programs and change values in programming Mode.
Incline hot keys�
Incline Hot Keys are set as: 6, 8 & 10.
For example, the incline level changes from any level
to 8 by pressing the Incline Hot Key 8.
Speed Up
- Increases the speed (0.8~20.0 Km/h ±0,1Km/h).
- Pressing and holding will increase the speed faster.
- Scroll programs and change values in programming Mode.
Speed Down
- Decreases the speed (0.8~20.0 Km/h ±0,1Km/h).
- Pressing and holding will decrease the speed faster.
- Scroll programs and change values in programming Mode
Speed hot keys:
Speed Hot Keys are set as: 6, 8 & 10 Km/h.
For example, the speed changes from any speed to 8 Km/h by
pressing the Speed Hot Key 8.
Mode
- Select program Mode.
- Confirm setting to enter next step in programming Mode.
- During workout Mode, change parameter for Speed/ Pulse &
Calories/ Incline window.
Manual
- Select the program Mode "Manual"(P-1) quickly.
Weight loss
- Select the program Mode "Weight loss "(P-2) quickly.
Interval
- Select the program Mode "Interval "(P-3) quickly.
Hill Climb
- Select the program Mode "Hill Climb "(P-4) quickly.
Walk
- Select the program Mode "Walk" (P-5) quickly.

Explanation of display items

Speed
- Shows the actual treadmill speed in workout Mode.
- Shows target speed in programming Mode.
Pulse
- Shows the pulse rate in workout Mode, or "P" when no pulse is
measured.
Distance
- Shows the ran distance workout Mode.
- Shows the target distance when being in programming Mode.
- Shows program selection when being in program Mode.
‼ NOTE
• This parameter will only count Up/ Down when walking/ running
on the treadmill. This is because of the build in movement
sensing system.
Time
- Shows the ran time in workout Mode.
- Shows the target time when being in programming Mode.
‼ NOTE
• If Time window shows "OIL" message, check section
"Lubrication" in this manual.
Calories
- Shows the consumed calories in workout Mode.
‼ NOTE
• This parameter will only count Up/ Down when walking/ running
on the treadmill. This is because of the build in movement
sensing system.
• This data is a rough guide for comparison of different exercise
sessions which cannot be used in medical treatment.
Incline
- Shows the actual treadmill incline in workout Mode.
- Shows target incline in programming Mode.
‼ NOTE
• If there is no operation it will return to "calories" window after
30 seconds�
Parameter range table
Time Min: Sec
Incline Step
Speed Km/H
Distance Km
Heart rate Beats per
minute
Calories Kilo Calories
2 4
0:00 30:00 5:00~ 0:00~
99:00 99:59
0 0 0~15 ~15
0�0 0�8 0.8~20 0.8~20
0 1�0 0.50~ 0.00~
99�9 99�9
P N/A N/A 50~
200
0 50 10.0~ 0.0~
999 999