Safe Disposal Requirement; Inspection And Contents Checklist - Mettler Toledo IND560 PDX Guia De Instalacion

IND560 PDX Installation Manual
explosive atmospheres in those areas. This includes Divisions 1 and 2 and Zones
0, 1, 2, 21 and 22. Contact an authorized METTLER TOLEDO representative for
information about hazardous applications.
DO NOT USE THE IND560 PDX TERMINAL IN AREAS CLASSIFIED AS HAZARDOUS BECAUSE
OF COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. CONTACT AN AUTHORIZED METTLER
TOLEDO REPRESENTATIVE FOR INFORMATION ABOUT HAZARDOUS AREA APPLICATIONS.

Safe Disposal Requirement

Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the
shipping container is damaged, check for internal damage and file a freight claim
with the carrier if necessary. If the container is not damaged, remove the IND560
PDX terminal from its protective package, noting how it was packed, and inspect
each component for damage.
If shipping the terminal is required, it is best to use the original shipping container.
The IND560 PDX terminal must be packed correctly to ensure its safe
transportation.
The package should include:
•
IND560 PDX Terminal
• Installation manual
1-6
WARNING!
HAZARDOUS AREA INSTALLATION
In conformance with the European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE) this device may not be disposed of in
domestic waste. This also applies to countries outside the EU, per their
specific requirements.
Please dispose of this product in accordance with local regulations at the
collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the
distributor from which you purchased this device.
Should this device be passed on to other parties (for private or professional
use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
•
Documentation CD (includes all manuals)
• Bag of parts including ferrites, grommets, etc.,
depending on terminal configuration