Starting And Stopping; Product Specifications - Homelite HBL26BVB Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
EN
FR
DE
ES
IT
Blower mode
Vacuum mode
Starting a cold engine
Starting a warm engine
Conforms to all regulatory standards
in the country in the EU where the
product is purchased.

STARTING AND STOPPING

To start a cold engine:
1. Set the 2 switches at "I" position.
2. Press slider plate into positive switch's slot to allow the
positive switch to engage and be ready to work.
3. Set the choke lever to "FULL" choke position.
4. Press the primer bulb 10 times.
5. Squeeze the throttle trigger.
6. Pull the starter grip until the engine attempts to start.
Do not pull the starter grip more than 8 times.
7. Set the choke lever to "HALF" choke position.
8. Pull the starter grip until the engine starts.
9. Wait 10 seconds.
10. Set the choke lever to "RUN" position.
11.
stop position.
PT
NL
SV
DA
NO
FI
English (Original instructions)
1
2
3
4
5
6
7
8
6x
9
10
11
1
2
3
4
+
6x
HU CS RU
RO PL
SL
To start a warm engine:
1. Set the 2 switches at "I" position.
2. Press the primer bulb 10 times.
3. Set the choke lever to "RUN" position.
4. Squeeze the throttle trigger. Pull the starter grip until
the engine attempts to start. Do not pull the starter grip
more than 6 times.
explain the levels of risk associated with this product.
Indicates an imminently hazardous
situation, which, if not avoided, will
DANGER:
result in death or serious injury.
Indicates a potentially hazardous
situation, which, if not avoided, could
WARNING:
result in death or serious injury.
Indicates a potentially hazardous
situation, which, if not avoided, may
CAUTION:
result in minor or moderate injury.
(Without Safety Alert Symbol)
CAUTION:
Indicates a situation that may result
in prop erty damage.
DESCRIPTION
1. Fuel cap
2. Starter grip
3. Blower tube
4. Positive switch at blowing side
5. Primer bulb
6. Spark plug
7. Choke lever
8. ON/OFF switch for blow mode
9.
10. ON/OFF switch for vacuum mode
11.
12. Vacuum grip handle
13. Positive switch at vacuuming side
14. Vacuum bag
15. Elbow tube
16. Upper vacuum tube
17. Lower vacuum tube
FEATURES

PRODUCT SPECIFICATIONS

Unit weight .............................................................. 5.2 kg
Engine Displacement................................................ 26cc
Air Velocity ......................................................... 320 km/h
Air volume......................................................... 11 m³/min
Rated power ........................................................0.65 kW
Recommended engine speed at idling ... 2800~3400 /min
15
HR ET
LT
LV
SK BG

Publicidad

Tabla de contenido
loading

Tabla de contenido