Weekly Timer - Gree EVO Serie Manual De Instrucciones

the unit is in operation.
This mode works only for the air conditioning function.
⑥
3�3�2�7 Holiday Release
In summer or high-temperature season, this function will make the unit pause to run in some specific
periods when the user is out.
[Operation Instructions]
Go to the FUNCTION page and locate "Holiday release", then, configure it through the Up/Down key
, "On" or "Off".
[Notes]
When it is activated, at the WEEKLY TIMER page, it is able to set some weekdays to "Holiday release".
①
In this case, the "Weekly timer" in this day is ineffective unless it is set to "Effective" manually.
This setting will be memorized upon power failure.
②
3�3�2�8 Weekly Timer
This function will make the unit run with certain modes in certain periods within a week based on the user's
actual needs.
[Operation Instructions]
1. At the homepage, by pressing the Function key
where "Weekly timer" is by switching pages, after that, press OK key
setting page.
2. At the WEEKLY TIMER setting page, by the Left/Right key
day and then by the Up/Down key
When this setting is finished, press OK key
16:15
Thursday
3. At the week day's setting page, it is allowed to set the running mode (Mode), temperature set point (WT-
HEAT). The running mode includes "Heat" and "Cool". There are totally five periods for each day, and each
period can be set to "√"or "×". Besides, it is able to set the "Start time" and "End time" for each period, as
shown in the figure below.
to set this day, "√", "×" or "Holiday", as shown in the figure below.
2013-01-04 Friday
Monday
√
√
Save
access to the FUNCTION page, and then locate
to go to this day's setting page.

WEEKLY TIMER

Tuesday Wednesday
√
Friday
√
Last
13
Unit Control
to go to the WEEKLY TIMER
it is able to select the desired week
√
Saturday
√
Next