Preparing Your Unit - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

5.

Preparing Your Unit

Before using the unit for the first time, you have to perform some simple preliminary settings.
Once the preparations are complete, your unit will be ready to mow your lawn.
5.1. Adjust the Cutting Height
Blade Cutting Range: 15 – 60 mm (0.6 – 2.4 inches)
To adjust the cutting height of the blade, do the
following:
CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF
BEFORE ADJUSTING THE CUTTING HEIGHT!
Lift the front side of the mower.
•
Turn the knob while pushing it down.
•
To raise the cutting height, turn clockwise.
•
To lower the cutting height, turn anticlockwise.
•
The cutting height is displayed at the side of the
•
mower.
5.2. One-Time Setup (Step by Step)
Make sure the Safety Switch is on and the Power Box is
plugged in before starting the One-Time Setup process.
The mower is now ready to perform the One-Time Setup
process.
5.2.1. Using the Operating Panel
Use the buttons on the Operating Panel as follows:
Press the 'Right' or 'Left' arrows until your desired
•
option is displayed.
Press OK to select the value shown on the display.
•
Press 'Back' (STOP) to go back or to cancel.
•
5.2.2. Choose Measurements Units and Formats
Area / Distance
Meter
EU
US Foot
5.2.3. Set Day and Time
Scroll to set the Day and press OK to confirm.
•
Scroll to set the Time and press OK to confirm.
•
Settings button
Temp. Clock
Celsius 24 Hours
12 Hours
Fahrenheit
(AM / PM)
Safety Switch
Cutting height adjustment
Right/Left arrows