Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento página 86

Screen Setting
Child Lock
¤ ¥ ¦ ¥
(Default =
  
Anti-Theft /
Disabling Device
¤ ¥ ¦ ¦
(Default =
  
Anti-Theft /
Disabling Device
¤ ¥ ¦ §
Change PIN code
Base Station
¤ ¥ ¦ © (Default =
 
Add Separated
¤ ¥ ¦  Zone
Remove Zone
¤ ¥ ¦ 
Sound
¤ ¥ ¦  (Default =
 
Mobile
Communication
¤ ¥ ¦  System
(Default =
  
Statistics
¤ ¥ ¦  (Default =
  
Bluetooth Remote
¤ ¥ ¦ Control Pairing
Last Termination
¤ ¥ § ¥ Event
Automatic
Operation
¤ ¥ § ¦
(Default =
 
Last Termination
¤ ¥ § ¥ Event
• The Child Lock feature locks the buttons to prevent unintended
operation, especially by children.
• If the Child Lock is set to 'On', to operate the mower it is required
) to first press one of the operating mode buttons and then to
press the OK button to confirm.
• The Anti-Theft / Disabling Device feature alarms the surroundings
in the event of an unintended use or removal of the mower from
its designated area.
• To turn the Anti-Theft / Disabling Device On for the first time, set
it to 'On' and choose a PIN code of 4 digits.
Tip: Select a number you can remember. Write it down (bottom
of Chapter 10), and keep it in a safe place.
• When the Anti-Theft / Disabling Device system is activated, 0000
)
will be displayed. Enter your 4-digit code to deactivate the Anti-
Theft / Disabling Device.
• If the code is not entered, then the message is changed to U062
(Alarm will soon be activated). Enter the code, otherwise the
alarm will start.
• Allows changing of the Anti-Theft / Disabling Device PIN code.
• Enter a new code and then re-enter the new code for
confirmation.
• This option should be used in a Separated Zone which has a Base
Station.
)
• If you have defined more than one zone, then select the relevant
zone before changing the setting.
• Enables the addition of a Separated Zone.
• L2 is displayed for Separated Zone A – press OK.
• Scroll to set the area of the Separated Zone and press OK.
• Enables the removal of a Separated Zone or a Sub-Zone.
• Choose the Zone you want to remove and press OK.
• Use the Sound option to turn all non-safety sounds off.
)
• Enables remote communication with the mower using a GSM
Module Accessory, which can be purchased separately.
• For more information, refer to Section 12 – Accessories.
)
• This menu is displayed only if P018 is set to 'On'.
• Enables to send the operation statistics from the mower to the
)
manufacturer for diagnostics in case of problems.
• Enables the pairing process between your unit and an outdoor
Bluetooth Remote Control that is available as an accessory (Refer
to Paragraph 12 Accessories).
• Enables the Behavior View of the special display (may be required
by a Service Station)
• This menu enables or disables (pauses) Automatic Operation
either in the main zone ('L1'), one of the Sub-Zones ('A1/ A2/ A3/
A4') or in the entire lawn ('All').
• When setting Automatic Operation to off in a particular zone, the
)
mower will skip the operation in that zone, but will continue to
mow all the other zones.
• Enables the Behavior View of the special display (may be required
by a Service Station)
Description Options
  ¨   
  ¨   
¦ § © 
¥ ¥ ¥ ¥
  ¨   
! §
¦ ¥ ¥
! § ¨ ! ©
" ¦ ¨ " § ¨ " © ¨ " 
  ¨   
  ¨   
  ¨   
" # #
! ¦
" ¦ ¨ " § ¨ " © ¨ " 
  ¨