Storage; Shipment; Troubleshooting - MSA SIRIUS Manual De Instrucciones

7.6 Storage

When not in use, store your SIRIUS Multigas Detector in a safe, dry place between
0 and 40 °C (32 and 104 °F).
WARNING!
After storage, always recheck instrument calibration before use. During storage, sensors
may drift or become inoperative.

7.7 Shipment

Pack the SIRIUS Multigas Detector in its original shipping container with suitable padding.
If the original container is unavailable, an equivalent container may be substituted. Seal
instrument in a plastic bag to protect it from moisture. Use sufficient padding to protect it
from the rigors of handling. Damage due to improper packaging or damage in shipment is
not covered by the instrument's warranty.

7.8 Troubleshooting

The SIRIUS Multigas Detector will operate reliably for years when cared for and maintained
properly. If the instrument becomes inoperative, follow the Troubleshooting Guidelines in
Table 4; these represent the most likely causes of a problem. You may return inoperative
instruments to MSA for repair.
To contact MSA, please call your supplier.
The instrument displays an error code if it detects a problem during startup or operation.
See Table 4 for a brief description of the error and proper corrective action.
When an inoperative component is located by using the guidelines, it may be replaced by
using one of the following Repair Procedures.
Warranty, Maintenance, and Troubleshooting 7
45