Maintenance And Care - Stihl FCB-KM Manual De Instrucciones

English
Replacing the protection against wear
4
5
Remove the blade – see "Fitting the
N
blade"
Unscrew screws (4)
N
Replace the protection against
N
wear (5)
Screw in and tighten screws (4)
N
Fit the blade – see "Fitting the
N
blade"
16

Maintenance and Care

The following information applies in
normal operating conditions. The
specified intervals must be shortened
accordingly when working for longer
than normal or under difficult cutting
conditions (extensive dust, etc.).
4
All accessible screws, nuts and bolts
check and retighten if necessary
N
Wheel
Visual inspection, before starting
N
work
Check that the wingnut is secure,
N
before starting work
Have it replaced if necessary – see
N
"Replacing the wheel"
Skirt
Visual inspection, before starting
N
work
Replace if damaged – see
N
"Replacing the skirt"
Blade
Visual inspection, before starting
N
work
Check that it is secure, before
N
starting work
If necessary, have it checked to see
N
if it is out of balance, replace if it is
out of balance – see "Replacing the
blade"
Replace if damaged – see
N
"Replacing the blade"
Protection against wear
Check before starting work
N
Replace if necessary – see "Check
N
and replace protection against
wear"
Safety information label
Replace illegible safety information
N
labels
FCB-KM