2.4 — Parts Shipped Loose
The generator is shipped with the following loose parts:
Rubber Mounts (units that include fascia)
•
•
Battery Terminal Cap
Main Line Circuit Breaker (MLCB) Terminal Caps
•
•
Main Line Circuit Breaker (MLCB) Locking Mechanism
•
Keys
Flexible Fuel Line
•
•
Wire Shielding to separate AC from DC control wires
Rear Mounting Brackets (2)
•
•
Installation/Owner's Manuals (CD if applicable)
Flexible Fuel Line
(Cable Strapped to Battery Cable or Alternator Bolt)
Installation Guidelines for Air-Cooled Generators
Rubber Mounts
Battery
Terminal Cap
MLCB Terminal Caps
MLCB Locking Mechanism
Keys
Figure 2-6. Loose Parts
Unpacking and Inspection
Wire Shielding
Rear Mounting
Installation Guidelines
For
Automatic Standby Generator
20 kW Guardian Synergy
Owner's Manual
For
NOT INTENDED FOR USE IN CRITICAL
Automatic Standby Generator
LIFE SUPPORT APPLICATIONS.
ONLY QUALIFIED ELECTRICIANS OR
CONTRACTORS SHOULD ATTEMPT
20 kW Guardian Synergy
INSTALLATION!
DEADLY EXHAUST FUMES! OUTDOOR
INSTALLATION ONLY!
This manual should remain with the unit.
This manual must be used in conjunction
with the appropriate owner's manual.
To locate in Spanish, go to
http://www.generac.com/service support/product support lookup
To locate in French, go to
http://www.generac.com/service support/product support lookup
NOT INTENDED FOR USE IN CRITICAL
LIFE SUPPORT APPLICATIONS.
ONLY QUALIFIED ELECTRICIANS OR
CONTRACTORS SHOULD ATTEMPT
INSTALLATION!
DEADLY EXHAUST FUMES! OUTDOOR
INSTALLATION ONLY!
Installation Manual
This manual should remain with the unit.
This manual must be used in conjunction
with the appropriate installation manual.
To locate in Spanish, go to
http://www.generac.com/service support/product support lookup
To locate in French, go to
http://www.generac.com/service support/product support lookup
Owner's Manual
Brackets
11