How To Obtain Service; Safety Rules - Generac 20 kW Synergy Guia De Instalacion

Ocultar thumbs Ver también para 20 kW Synergy:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety and General Information
*
This symbol points out important safety information that, if not followed, could
endanger personnel and/or property.
$
This symbol represents the potential for an Explosion Hazard.
!
This symbol represents the potential for a Fire Hazard.
+
This symbol represents the potential for an Electrical Shock Hazard.
The operator is responsible for proper and safe use of the equipment. The manufacturer strongly recommends that if
the operator is also the owner, to read their Owner's Manual and thoroughly understand all instructions before using
this equipment. The manufacturer also strongly recommends instructing other users to properly start and operate the
unit. This prepares them if they need to operate the equipment in an emergency.
1.1.2— How to Obtain Service
When the generator requires servicing or repairs, contact a Dealer for assistance. Service technicians are factory-
trained and are capable of handling all service needs. For assistance locating a dealer, call our dealer locater at 800-
333-1322 or visit us at www.generac.com/dealer-locator.
When contacting a Dealer about parts and service, always supply the complete model number and serial number of the
unit as given on its data decal, which is located on the generator. See section "The Generator" for decal location.
Model No. _____________________ Serial No. __________________________
1.2 — Safety Rules
*
Save These Instructions – The manufacturer suggests that these rules for safe operation be copied
and posted near the unit's installation site. Safety should be stressed to all operators and potential
operators of this equipment.
Study these SAFETY RULES carefully before installing, operating or servicing this equipment. Become familiar with
this Installation Manual and with the unit. The generator can operate safely, efficiently and reliably only if it is properly
installed, operated and maintained. Many accidents are caused by failing to follow simple and fundamental rules or pre-
cautions.
The manufacturer cannot anticipate every possible circumstance that might involve a hazard. The warnings in this
manual and on tags and decals affixed to the unit are, therefore, not all-inclusive. If using a procedure, work method or
operating technique the manufacturer does not specifically recommend, ensure that it is safe for others. Also, make
sure the procedure, work method or operating technique utilized does not render the generator unsafe.
*
Despite the safe design of this generator, operating this equipment imprudently, neglecting its mainte-
nance or being careless can cause possible injury or death. Permit only responsible and capable per-
sons to install, operate and maintain this equipment.
+
Potentially lethal voltages are generated by these machines. Ensure all steps are taken to render the
machine safe before attempting to work on the generator.
*
Parts of the generator are rotating and/or hot during operation. Exercise care near running generators.
*
Installation must always comply with applicable codes, standards, laws and regulations.
*
A running generator gives off carbon monoxide, an odorless, colorless poison gas. Breathing in carbon
monoxide can cause headaches, fatigue, dizziness, nausea, vomitting, confusion, fainting, siezures or
death.
2
Installation Guidelines for Air-Cooled Generators

Publicidad

Tabla de contenido
loading

Tabla de contenido