HPP H Serie Instrucciones Para El Ensamblaje -Uso Y Mantenimiento página 27

The symbol:
marking certain parts of the text indicates a likely chance of injury to persons unless the relative pre-
scriptions and indications are followed.
The symbol:
marking certain parts of the text indicates the possibility of damaging the pump unless the relative
instructions are followed.
m
WARNING!
• During unpacking, always wear gloves and protective eyewear, to prevent injuring hands and eyes.
• The pump is a heavy component (also refer to the "SPECIFICATIONS AND TECHNICAL DATA" paragraph).
It is best therefore to open and move the packaging according to the instructions on the packaging
itself, using handling and lifting equipment with a capacity compatible with the gross weight indicated
on the shipping document.
• Lifting operations must be performed by expert personnel, in accordance with the workers' safety regu-
lations applicable in the country where the machine integrating the pump is assembled. In particular,
operations must be performed very slowly, without any sudden load shifts.
• The packaging elements (plastic bags, staples, etc.) must not be left within reach of children as they
represent potential hazard sources.
• Packaging components must be disposed of according to the regulations in force in the country where
the machine integrating the pump has been manufactured. Plastic packaging must not be discarded in
the environment.
• After unpacking the pump, make sure no parts are missing and that all parts are in perfect condition,
and that the identification plate is in place and legible. In case of any doubt, do not install the pump, but
contact the Manufacturer's After-Sales Service.
• The manuals and the warranty certificate must always accompany the machine integrating the pump
and made available to the end user.
CAUTION!
• The pump must be handled cautiously, avoiding jerks and knocks.
SYMBOLS
m
WARNING!
CAUTION!
UNPACKING
27
IT
EN
FR
ES
DE
PB