Changing The Oil - HPP H Serie Instrucciones Para El Ensamblaje -Uso Y Mantenimiento

RECOMMENDATIONS REGARDING THE LUBRICATING OIL USED IN THE PUMP
Oil level
• At least once a day check the oil level through the viewer; this should be done when the machine is
working. If the level is below that indicated (in the middle of the viewer) it must be topped up.

Changing the oil

• Oil anomalies can also be detected through the viewer: if any are found the oil must be changed im-
mediately.
• The first oil change is after 30 hours of work, the second after 100 hours and then every 300 hours. It
is preferable to change the oil when the pump is still hot.
• Empty the pipes and heat exchanger before putting the new oil in.
• Replace the oil filter (original HPP spare part).
• Clean the magnetic plug.
CAUTION!
Used oil and components that have been replaced must be disposed of responsibly.
oil viewer
oil pump
magnetic plug
QUANTITY OF OIL PER MODEL
quantity in volume
MODEL
l - USgal
H-100 25 - 6,6
H-120 25 - 6,6
H-150 25 - 6,6
H-200 33 - 8,7
H-300 41 - 10,8
H-550 71 - 18,8
oil filter
quantity in weight
kg - lb
22,5 - 49,6
22,5 - 49,6
22,5 - 49,6
29,7 - 65,4
36,9 - 81,3
63,8 - 140,7
36
heat exchanger