Type Key; Scope Of Delivery; Accessories (Optionally Available); Transportation And Storage - Wilo EMUport CORE Manual De Instrucciones

TRANSPORTATION AND STORAGE

Max. reservoir flooding:
CORE 20.2:
CORE 45.2:
CORE 50.2:
CORE 60.2:
Fluid temperature [t]:
Ambient temperature:
Motor data
Mains connection [U/f]:
Power consumption [P ]:
1
Rated power [P ]:
2
Rated current [I ]:
N
Speed [n]:
Activation type [AT]:
System protection class:
Insulation class [Cl.]:
Max. switching operations/h: 30
Cable length:
Operating mode:
Connections
Pressure connection:
CORE 20.2:
CORE 45.2:
CORE 50.2:
CORE 60.2:
Inlet connection:
Ventilation connection:
Dimensions and weights
Gross volume:
CORE 20.2:
CORE 45.2:
CORE 50.2:
CORE 60.2:
Switching volume:
CORE 20.2:
CORE 45.2:
CORE 50.2:
CORE 60.2:
Sound-pressure level*:
Weight:
* The sound-pressure level depends on the
duty point and may vary. Incorrect installation
or impermissible operation can increase the
sound-pressure level.
Installation and operating instructions Wilo-EMUport CORE
5 m for max. 3 h
6,7 m for max. 3 h
6,7 m for max. 3 h
6,7 m for max. 3 h
+3...+40 °C
+3...+40 °C
3~400 V/50 Hz
See rating plate
See rating plate
See rating plate
See rating plate
See rating plate
IP68
H
10 m
See rating plate
Version A: Ø 90 mm
Version B: DN 80
Version A: Ø 100 mm
Version B: DN 100
Version A: Ø 100 mm
Version B: DN 100
Version A: Ø 100 mm
Version B: DN 100
DN 200, PN 10
DN 70
440 l
1200 l
1200 l
1200 l
295 l
900 l
900 l
900 l
< 80 dB(A)
See rating plate

3.7. Type key

Example: Wilo-EMUport CORE 20.2-10A
Standardised sewage lifting unit with solids
CORE
separation system
20 Max. inlet in m³/h
2 Number of pumps
10 Maximum delivery head in m at Q = 0
Version:
A A = standard version
B = comfort version

3.8. Scope of delivery

• Sewage lifting unit ready for connection with
10 m cable and bare cable ends
• Installation and operating instructions

3.9. Accessories (optionally available)

• On pressure side:
• Flange connectors for connecting the discharge
pipe to the pressure connection without flange
connectors
• On intake side:
• FFRe piece of pipe for connecting different
inlet pipes
• Gate valve
• Inlet sets comprising FFRe piece of pipe and
gate valve
• Flow meter set
• Flange connectors for connecting pipes with-
out flange connector
• General:
• SC-L...-FTS switchgear
• Horn 230 V, 50 Hz
• Flash light 230 V, 50 Hz
• Signal lamp 230 V, 50 Hz
4. Transportation and storage
DANGER due to toxic substances!
Lifting units that pump fluids that are harmful
to health must be decontaminated before any
other work is performed! Otherwise there is
a risk of death! Wear the necessary physical
protection equipment!

4.1. Delivery

On delivery, check immediately that the shipment
is complete and undamaged. If any parts are
damaged or missing, the transport company or
the manufacturer must be notified on the day of
delivery since claims made after this date cannot
be recognised. Damage to parts must be noted on
the delivery or freight documentation.

4.2. Transport

Only the designated and approved fastening
devices, transportation and lifting equipment
may be used for transportation. It must have a
sufficient bearing capacity and safe working load
in order for the lifting unit to be transported safe-
ly. The lifting equipment is not permitted to be
English
39